Today, we are surrounded by a lot of technological devices and we cannot think of spending even a single day of our life without these devices for the reason that they have made our livers much easier and have reduced the physical labor. In this regard, today, we have a very useful and time saving devices know as remote car starters.
Remote car starter lets you turn the ignition without key being present in the vehicle and can keep the car running after removing the key, allowing you to quickly stop without turning off the car. Remote car starters add a touch of luxury to any vehicle, especially during the winter months because you can stay warm within the confines of your home while your vehicle warms and defrost outside. However, installing a remote car starter is a complicated task that requires knowledge of electronics, wiring, splices and general knowledge of the circuits.
Check with the manufacturer of remote starter to ensure that the model you buy is compatible with your vehicle. If your car was manufactured during the early years of 2000 or later, you can have a microchip installed on your ignition key, which functions as an added safety feature and prevents the car from starting unless the key is present in the ignition. Contact the vehicle manufacturer on whether you have this feature in your car or not. If your key has a microchip, a relay to override this safety feature in the ignition wiring will enable the remote starter to function accurately.
To install the remote starter, it is also needed for the electrical wiring diagram of your vehicle, which can be found in a manual or you can contact the vehicle manufacturer. Electrical diagrams of some vehicles are free online.
Snipping the thread in a wrong manner in your car can lead to highly disastrous results. Before driving your vehicle on the road, it is suggested that you check all the other features of your vehicle including brakes, power steering, windows and exterior lights, so that you can avoid any hazards on the road.
If you want to install a remote car starter, I recommend you that you check over here a large a useful collection of remote car starter along with their reviewers so that you can make a final choice of which one you should choose and enjoy the functions and save time.
Technology has offered a great number of facilities in the automotive industry including the application of remote control starters. With any wireless device, a few problems can occur that require techniques to solve the issues by car owners.
A remote car starter is a portable device such as a car alarm unit, which controls the engine ignition. A user can start his/her car from a distance, allowing to heat the engine and heat or cool the interior as pert the climate before the time of entering the vehicle.
If the remote car starter is activated and the vehicle does not respond, it is a common problem of low battery. Make sure the remote control starter has a full battery. In addition, some models require learning remote start engine speed or tachometer. If it does not detect this configuration, the remote control will not work. The system will be reset in this instance.
Depending on the model, a remote car starter may malfunction and provide a code in form of flashing parking lights. The number of flashes of light correspond to a fault in the system. You can refer to the individual model manual to clarify the issue.
How to fix the remote car starter?
Remote car starters are common accessories in vehicles of all kinds of makes and models. These remote systems allow you to put your car up to 200 feet away in the parking lot or on the street and let the car warm while you get ready to leave. You can get a broken remote starter working again in a few minutes and have the system ready for use immediately with a few tips.
- Put your remote system in the dashboard under the steering column. Make sure all cables are connected completely from your system to boot and the positive terminal of the battery and ensure that all fuses are operating.
- Open the case of your wireless remote control with a flathead screwdriver and remove the old battery. Place a new battery in the same place as the old remote control and close it again after adjustment.
- Get in your car with your key and remote to start the engine and stop the driver’s door opening behind you. Insert the key into the ignition and turn it to the ‘ACC’ position.
- Press and release the button ‘Valet’ on your remote control and wait for the system to start beeping. Press again the same button and keep it this time.
- Press the start button while still having the button ‘Valet’ holding both buttons for at least three seconds. Wait for the car system to ring again and release it to complete the troubleshooting and programming.