Radiant floor heating system is an important method of saving energy costs, something that is certainly particularly crucial today during the use of continuous reduction of our insatiable thirst for foreign oil.
Radiation is the change of heat through an empty space. This type of system uses the same principle as socket heaters, but it does better by heating the entire plant. Another advantage could be that the heat could be felt directly by the residents while walking barefoot. Radiant floor heating systems can be separated into three categories with respect to heat carrier medium as radiant air, electricity or hot water whereas there are also two installation methods as wet and dry.
When it is used in residential applications, it is usually not very powerful because of the limited heat load capacity of air coming out of electric and hot water systems. Electrical heating systems include cables that are part of a floor or electrically conductive plastic mats that can be placed and usually involve the subfloor as well as the floor covering. Electrical systems are the most beneficial when coupled with usage of time rates, allowing the person to heat the concrete floor during rush hour. If the dough with the floor is large enough, heat stored in it will keep the house comfortable for about ten hours. This can save the homeowner a lot of money compared to warming up during the day.
The most famous form of radiant floor heating system can be the hot water system, considering that it is without doubt the most efficient one. In this type of system, water is heated in the boiler after which it circulates through pipes located on the floor. There are many different ways to heat water with each of them with an advantage. When it comes time to install the radiant floor heating system, regarding ground a couple of considerations should be made. For example, carpet can be used, but since it is often an insulation, it decreases the efficiency of the system. This is often compensated by running the machine with a higher temperature. Many people use tiles because it conducts and keeps the heat well. If the hardwood is to be used, then stick to the floating floorboard instead of wood because wood has a tendency to reduce and crack when heated.